2004 Chrysler Crossfire - Miller  Special Tools / Waterloo Tool Box

Miller Special Tools Truck

Crossfire Tool Locator

Provided with the Miller Special Tools for the Chrysler Crossfire, is a two-page laminated guide to the tool locations in the Waterloo Traxx Tool Drawer.  On the Miller Special Tools web site, one can look up tools by part number and get a more detailed description of the tools, along with current prices.  I located all but one of the tools and have compiled the data here for historical purposes.  It provides a quick way to find out what each tool is used for.  Note that some tools provided in this set are general purpose tools that may be used on other vehicles while others are very specialized for the Crossfire.

Here is a complete inventory of all tools by Application, Part number, both names the tools are listed under, drawer location, and price as of September 2008.

Here's the PDF of this version - Password crossfire

 

 

Application Tool No Generic Name Crossfire Locator Name

Description

 Drawer Price Illustration
Front Axle and Suspension 938 BRIDGE Bridge Use this special tool with the 1130 Splitter to remove various bearings and gears. This tool is also used with 8019 Adapters and 1126 Splitter to press the Shafts and Shift Unit out of the rear section of the Manual Transmission in Crossfire Vehicles. 1994 thru Current 4 $180.71
Engine 1026 PULLER 3 Jaw Puller This tool is used to remove the Output Shaft Flange during service procedures on the Manual Transmission in Crossfire vehicles. Also used to remove Harmonic balancers on Chrysler vehicles and on the CVT Transaxle in Caliber vehicles. 1995 thru current. Also see 1023 5 $51.33
Front Axle and Suspension 1126 SPLITTER, BEARING/GEAR Splitter This heavy duty Splitter is used in conjunction with the 938 Bridge to remove various bearings and gears. This tool is also used with a Press during Gear Train Service procedures on the Manual Transmission in Crossfire Vehicles. Also used on the T355 transaxle in Caliber vehicles. 4 $92.49
Front Axle and Suspension 1130 SPLITTER, BEARING/GEAR Splitter This heavy duty Splitter is used in conjunction with the 938 Bridge to remove various bearings and gears. This tool is also used with a Press during Gear Train Service procedures on the Manual Transmission in Crossfire Vehicles. Also used on the T355 transaxle in Caliber vehicles. 4 $92.49
Automatic Transaxle, Front Wheel Drive 6311 GAUGE BAR Gauge Bar This special tool is used when measuring the transmission case and gear train in order to select the correct gear train end-play shim in the NAG1, NV5600, 42RE, 46RE and 48RE Transmissions. 1988 thru Current. This tool is also used on the CVT Transaxle 3 $81.73
Front Axle & Front Suspension 6790 TOOL, TRAK LOK TORQUE Hub Puller Use this special tool along with the C-637CF Slide Hammer to remove the rear Hubs from the 2004 Crossfire Vehicle. Also used on 8 1/4" & 9 1/4" Corporate Axles, 194RBI, 198RBI, 198RBI, 216RBI, 226RBA Axles & T350 Transmissions. 5 $30.29
Manual Transmission, Rear Wheel Drive 8019 ADAPTER, SPLITTER 938 Bridge Adapter Use these special adapters to connect the 938 Bridge and 1126 Splitter to press the Shafts and Shift Unit out of the rear section of the Manual Transmission in 2004 through Current Crossfire Vehicles. Also see 1126 4 $35.59
Manual Transaxle, Front Wheel Drive 8870 REMOVER, DETENT PLUG Detent Plug Remover Use this special tool with the C-3752 Slide Hammer to remove the Detent Plug from the Manual Transmission Case during service procedures on Crossfire Vehicles. Also used to remove the Detent Plug from vehicles equipped with a G288 Manual Transaxle and G238 Manual Transmission. 2003 thru Current 3 $29.56
Automatic Transmission, Rear Wheel Drive 8900 COMPRESSOR, SPRING Spring Compressor Use this special tool to compress the B1, B2 and K1 thru K3 spring washers to allow the removal of the spring retainer snap-rings in NAG1 Automatic Transmissions. 2003 thru Current 3 $481.91
Automatic Transmission, Rear Wheel Drive 8901A PRESSING TOOL Pressing Tool Use this revised Pressing Tool to compress the spring washers in the B1, B2 and K1 thru K3 clutches when measuring for proper clutch clearance on all NAG Automatic Transmissions 2003 thru current. NOTE: Supersedes 8901 6 $155.79
Automatic Transmission, Rear Wheel Drive 9078 STAKING TOOL Staking Tool This special tool is used with the C-4171 Drive Handle to stake the Output Flange Retaining Nut into position after the proper torque is obtained on vehicles equipped with the NAG1 Automatic Transmission. 2003 thru Current 2 $83.91
Automatic Transmission, Rear Wheel Drive 9082A REMOVER, BEARING Output Shaft Bearing Puller This special tool is used to remove the output shaft bearing from the NAG1 Automatic Transmission while the output shaft is installed. 2003 thru Current 2 $210.45
Engine 9100 INSTALLATION TOOL Crankshaft Seal Installer Use this tool to install the Rear Main Crankshaft Seal to its proper depth in Crossfire Vehicles equipped with a 3.2 Liter Engine. 3 $456.55
Engine 9101 SLEEVE Crankshaft Seal Installer Use this tool with the 9103 Seal Installer to install the Front Crankshaft Seal to its proper depth in Crossfire Vehicles equipped with a 3.2 Liter Engine. 1 $86.52
Engine 9102 LOCK, FLYWHEEL Flywheel Lock This tool is used to lock the Flywheel in place for various service procedures on 3.2 Liter Engines in the Crossfire vehicles. 1 $88.87
Engine 9103 INSERTION TOOL Crankshaft Seal Installer Use this tool in conjunction with the 9101 Seal Installers to install the Front Crankshaft Seal to its proper depth in Crossfire Vehicles equipped with a 3.2 Liter Engine. 1 $93.49
Engine 9104 ARRESTING PLATE 40 Degree Camshaft Holder (Right) This tool is used to hold the Right Side Camshaft in a 40 degree ATDC position during service procedures on the Crossfire Vehicles equipped with a 3.2 Liter Engine. 1 $49.89
Engine 9105 ARRESTING PLATE 40 Degree Camshaft Holder (Left) This tool is used to hold the Left Side Camshaft in a 40 degree ATDC position during service procedures on the Crossfire Vehicles equipped with a 3.2 Liter Engine. 1 $68.24
Engine 9106 VALVE SPRING COMPRESSOR KIT Valve Spring Compressor - Head On Use this tool to service Valve Train Components in Crossfire Vehicles equipped with the 3.2 Liter Engine. NOTE: Cylinder Head on. 5 $534.92
Cooling System & A/C 9107 ADAPTER, COOLANT RESERVOIR Radiator Test Adapter This special Radiator Pressure Test Adapter must be used with the 7700 or equivalent Pressure Test Kit to perform cooling system diagnostics on Crossfire Vehicles. 1 $102.49
Engine 9108 AID, ASSEMBLY   Use this new special tool to assemble the convertible top hydraulic line retaining clip to the hydraulic line on the New 2005 Crossfire Convertible   $33.55 9108 Aid, Assembly
Engine 9109 BRACKET, LIFTING   This new bracket is used in conjunction with the existing lifting brackets, an engine lifting bridle and engine hoist to remove and install the Supercharged Engine in 2005 SRT6 Crossfire Vehicles.   $28.47 9109 BRACKET, LIFTING
Rear Axle and Suspension 9110 REMOVER/INSTALLER, BUSHING   This special tool is required while servicing the Rear Cradle Bushings on Crossfire vehicles. 2004 thru Current   $336.51 9110 Remover/Installer, Bushing
Rear Axle and Suspension 9111 REMOVER/INSTALLER, BUSHING   Use this special tool while servicing the Front Cradle Bushings on Crossfire vehicles. 2004 thru Current   $157.43 9111 Remover/Installer, Bushing
Engine 9112 ADAPTER, OIL PRESSURE   This special adapter is used with the C-3292A Pressure Gauge during engine oil pressure diagnostics on Crossfire vehicles. 2004 thru Current   $44.89 9112 Adapter, Oil Pressure

Rear Axle and Suspension

 9113 REMOVER/INSTALLER, BUSHING   This special tool must be used to remove and install the Rear Differential Mounting Bushing on Crossfire Vehicles. 2004 thru Current   $181.17 9113 REMOVER/INSTALLER, BUSHING
Manual Transmission, Rear Wheel Drive 9120 ALIGNMENT TOOL Shifter Alignment Tool This special tool is used to ensure that the shift Lever is properly aligned in the Manual Transmission in Crossfire Vehicles. 4 $27.95
Manual Transmission, Rear Wheel Drive 9122 PUNCH, DRIFT Oil Seal Installer Install the Output Shaft Seal to its proper depth in Crossfire Vehicles equipped with a Manual Transmission. 3 $46.89
Manual Transmission, Rear Wheel Drive 9123 PUNCH, DRIFT Oil Seal Installer This special tool is used to install the Input Shaft Seal to its proper depth in Crossfire Vehicles equipped with a Manual Transmission. 3 $175.67
Body 9126 PINS, ALIGNMENT   These special Alignment Pins are used to align the Convertible Top Frame to the Body when servicing the convertible top on 2005 Crossfire vehicles equipped with a Convertible Top.   $38.00 9126 Alignment Pins
Body 9127     This special tool is used to align the Convertible Top Rear Bow Striker with the Rear Bow Latch when the top is serviced on the 2005 through Current Crossfire Convertible.   $38.00 9127 Alignment Pins
Front Axle & Front Suspension 9150 COMPRESSOR, SPRING Spring Compressor (Note: Same Compartment as 9151) This special tool is used in conjunction with the 9152 Clamping Plates to remove and install the Front Suspension Strut Coil Springs during service procedures on Crossfire vehicles. 1 $900.00
Rear Axle & Rear Suspension 9151 CLAMP Spring Compressor (Note: Same Compartment as 9150) This new special tool is used in conjunction with the 9152 Clamping Plates to remove and install the Rear Suspension Strut Coil Springs during service procedures on Crossfire vehicles. 1 $900.00
Front Axle & Front Suspension 9152 PLATES, CLAMPING Spring Compressor Plates These special Clamping Plates are used with the 9150 & 9151 Spring Compressors to service the Front and Rear Springs on Crossfire vehicles. 1 $340.00
Steering 9159 SEAL INSTALLER Seal Installer Use this tool to install the Steering Gear Pitman Shaft Seal to its proper depth in Crossfire Vehicles. 1 $100.67
Front Axle & Front Suspension 9168 REMOVER, BALL JOINT Ball Joint Remover This special tool must be used to separate the Ball Joint from the Upper Control Arm on Crossfire Vehicle. 1 $102.00
Rear Axle & Rear Suspension 9199 REMOVER/INSTALLER, BEARING Hub Bearing Remover/Installer This special tool is used to remove and install the Rear Axle Hub Bearings in Crossfire Vehicles. 2 $376.08
MANUAL TRANSMISSION, REAR WHEEL DRIVE 9204 AID, ASSEMBLY   This special tool is used to hold and align the Mainshaft and Countershaft during assembly of the Crossfire Manual Transmission.   $163.29 9204 Assembly Aid
Rear Axle & Rear Suspension 9223 DRIFT Oil Seal Installer Use this special tool to install the Differential Case Axles Seals to their proper depth on the Crossfire and LX vehicles equipped with 198 or 210 Rear Axles. 3 $163.29
Rear Axle & Rear Suspension 9231A INSTALLER, PINION OIL SEAL Oil Seal Installer This special tool is used to install the Pinion Seal to its proper depth on LX vehicles equipped with the 198 or 210 Rear Axle. 2 $53.67
Fuel System 9240 WRENCH, PIN Fuel Tank Sender Wrench Remove and install the fuel Tank Pump/Sender Unit from Crossfire Vehicles with this special tool. 1 $83.25
Body 9241 REMOVER/INSTALLER, RADIO ASSEMBLY Radio Remover/Installer These special tools must be used to remove or install the Radio in Crossfire and Sprinter vehicles. 1 $12.29
Automatic Transmission, Rear Wheel Drive 9287 INSTALLER, BEARING Output Shaft Bearing Installer Use this special tool to install the rear output shaft bearing into the NAG1 Automatic Transmission case. 2003 thru Current 2 $44.44
STOW N' GO SEAT TOOL 9313 CLIP, SEAT ARTICULATION   This new special clip must be used to prevent injury and damage to the Seat Struts while removing and installing the Stow N Go Seats in 2005 Mini Vans.   $26.04 9313 Clip, Seat Articulation
Automatic Transmission, Rear Wheel Drive 8266-18 SOCKET Socket This special tool is used with Handle 8266-8 and a Dial Indicator to measure the gear train end-play of the NAG1 Automatic Transmission. 2003 thru Current 2 $72.80
Automatic Transaxle, Front Wheel Drive 8266-8 HANDLE Handle Use this special tool along with End-play Adapter 8266-18 and a Dial Indicator to measure the gear train end-play of the NAG1 Automatic Transmission. Included in 8266A Kit. 2003 thru Current 2 $23.32
Automatic Transmission, Rear Wheel Drive 8863B DIPSTICK Dipstick This special Dip Stick must be used to ensure proper Automatic Transmission Fluid Levels in the Sprinter & Crossfire. NOTE: Consult your Service Manual for the proper fluid level checking procedures. Also see 9336 for LX Models. 2003 thru Current 6 $58.27
Automatic Transmission, Rear Wheel Drive 8902A INSTALLER, SEAL Output Shaft Seal Installer Use this installer to install the Torque Converter Hub Seal and the Output Shaft Seal in the NAG1 Automatic Transmission. 2003 thru Current 2 $53.49
Rear Axle & Rear Suspension C-3281 HOLDER, FLANGE Flange Holder Use this special Flange Holder to hold the Pinion Flange while removing or installing the Pinion Retaining Nut during service procedures on various axles. Consult your service manual for proper applications. This tool is also used to hold the Output Shaft Flanges on Crossfire Automatic and Manual Transmissions during service procedures. 6 $182.17
Engine C-3422CF COMPRESSOR, VALVE SPRING Valve Spring Compressor - Head Off This Valve Spring Compressor is used on the Crossfire 3.2 Liter Engine to service Valve Train Components with the Cylinder Head off of the engine. 2004 through Current 6 $341.16
Automatic Transaxle, Front Wheel Drive C-3752 SLIDE HAMMERS Slide Hammer Use these Slide Hammers to remove the Front Pump from the housing in Automatic Transmissions and Transaxles. Also used with the 8870 Detent Plug Remover to remove the Detent Plug from the Manual Transmission Case during service procedures on the Crossfire Vehicles. 3/8th thread pitch. All Transmissions and Transaxles thru Current 3 $74.77
Front Axle & Front Suspension C-3894-A PULLER,TIE ROD Tie Rod Puller This special tool is used to separate the Tie Rod End from the Steering Knuckle on Passenger Cars, Mini-Vans, Trucks & Jeeps. Also used on Crossfire & Dodge Sprinter vehicles and used to remove the Steering Wheel from Jeep vehicles. 1 $93.31
Transfer Case C-4171 DRIVER HANDLE, UNIVERSAL Drive Handle This special tool is used with various removers and installers and is designed for Quick Disconnect adapters (Non-Threaded) 2 $18.09
Rear Axle & Rear Suspension C-637CF SLIDE HAMMER Slide Hammer Use this special tool along with the 6790 Hub Puller to remove the rear drive axles from the Crossfire Vehicles. 6 $31.89
               
    Waterloo Traxx Tool Chest Tool Chest Tool Chest provided with Crossfire Special Tools, value estimated based on similar chest on manufacturer site. 0 $1,000.00  
               
  Total         $9,416.65  
               
               
               

Return to Crossfire Special Tools Locator

Click or the [ BACK ] button on your browser to return to the previous page.

Photos, Layout and Design © 2008 Paul M. Provencher All Rights Reserved.
Contents of this Web Site may not be used without written permission

Hit Counter Visitors since 8/13/08

Home